Magnolia Plastics
Compound 3102, Parts A & B
Plastics for the Space Age Since 1957
Compound 3102, Parts A & B
DESCRIPTION
Magnolia 3102, Parts A & B is a two part epoxy compound used for
sealing capacitors in automated production facilities. This
product has excellent electrical properties, flame
retardance, moisture resistance and a good combination of
long pot life and fast cure. Compound 3102 is a modified
version of Compound 3106 designed to have improved flame
retardance.
SPECIAL FEATURES
1. Fast cure. Five to ten minutes at 100°C does the job
in large box capacitors.
2. Does not hard settle. There is no caking or packing in
lines and pumps of automatic dispensing equipment.
3. Low in skin irritation potential.
4. Rated UL 94 V-0 in thicknesses as low as 0.067 inches
under UL File No. E83708 (R).
PROPERTIES OF UNCURED MATERIAL
Viscosity:
Part A - 2,500 cps
Part B - 180 cps
Mix - 1,600 cps
Specific Gravity: Part A - 1.48
Part B - 1.00
Mix - 1.40
Cure Schedule: 8-12 hours at 25°C or 10-20
minutes at 85°C or 5-10
minutes at 100°C
Pot Life @ 77°C, 3 oz. 60-65 minutes
@ 150°C 15 minutes
Shelf Life: Part A - 6 months
Part B - 6 months
SPI Classification: Part A - 4 Part B - 4
Mix Ratio: Parts by weight, A:B -
100:13.5
Parts by volume, A:B - 100:9.3
STIR PART A BEFORE USING.
CURED PROPERTIES
Volume Resistivity, ASTM D-257
Test Temperature Ohm-cm
25°C 1 X 1015
85°C 3 X 1013
125°C 1 X 1011
155°C 6 X 1010
Surface Resistance, ASTM D-257
Test Temperature Ohms
25°C 5 X 1016
85°C 4 X 1014
125°C 7 X 1011
155°C 3 X 1010
Flame Retardance, UL-94, 1/16" thickness V-0
white, yellow, blue
Water Absorption, Percent, ASTM D-570, 24 hours
@ 25°C: +0.24
Thermal Conductivity, Cal cm/sec cm2 °C 1.3 X 10-3
ASTM D-2214
Shore D Hardness, 25°C, ASTM D-2240 88
DANGER FIRST-AID
-------------------------------- -------------------------
May cause severe irritation. Eyes - Immediately flush
Do not get in eyes, on skin eyes with plenty of water
or clothing. for at least 15 minutes.
Do not inhale vapors. Get medical attention.
Wear rubber gloves & aprons. Skin - Wash immediately
Use with adequate ventilation. with soap and water.
Wash thoroughly after handling. Clothing - Remove clothing
For industrial use only. and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 01/18/93
For more information, contact us at:
Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296 USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email: sales@magnapoxy.com
How To Order:
Doing Business with Magnolia Plastics
Return to Magnolia Plastics Home Page
Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including
the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a
regsitered trademark of Magnolia Plastics, Inc.
Contact Magnolia at sales@magnapoxy.com
Updated: November 13, 1999
