Magnolia Plastics Adhesive Magnobond 58 and 58-2
Plastics for the Space Age Since 1957
Magnobond 58 and 58-2, Parts A & B
DESCRIPTION
Magnobond 58 and 58-2, Parts A & B are very fast setting, two
component, epoxy adhesives. Magnobond 58 "A" and 58 "B" are both clear
in color, whereas Magnobond 58-2 "A" is white and 58-2 "B" is gray.
The color of mixed 58-2 "A" and 58-2 "B" is off white or light gray.
SPECIAL FEATURES
Magnobond 58 and 58-2 have good adhesion to wood, brick, concrete,
steel, aluminum and some plastics. Excellent high strength, patches to
molded fiberglass parts and molds can be made quickly with Magnobond 58
and 58-2.
HANDLING CHARACTERISTICS
The users of Magnobond 58 and 58-2 should be cautious when mixing more
than 3 ounces of these adhesives because of the high exotherm and short
working time.
When working with any chemicals, care should be taken to keep them away
from one's skin. If contact with skin takes place, wash thoroughly
with soap and water immediately.
PROPERTIES OF UNCURED MATERIAL
Specific Gravity: A - 1.15
B - 1.10
Viscosity: A - 15,000 cps
B - 15,000 cps
MIXING INSTRUCTIONS
Mix Rate: 1:1 by weight or volume
Pot Life (3 oz.): 2-3 minutes
Cure Schedule: 15 minutes - Set
3 days - Full cure
DANGER FIRST-AID
-------------------------------- -------------------------
May cause severe irritation. Eyes - Immediately flush
Do not get in eyes, on skin eyes with plenty of water
or clothing. for at least 15 minutes.
Do not inhale vapors. Get medical attention.
Wear rubber gloves & aprons. Skin - Wash immediately
Use with adequate ventilation. with soap and water.
Wash thoroughly after handling. Clothing - Remove clothing
For industrial use only. and wash before reuse.
Keep container closed.
Do not reuse this container.
For more information, contact us at:
Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296 USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email: sales@magnapoxy.com
How To Order:
Doing Business with Magnolia Plastics
Return to Magnolia Plastics Home Page
Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including
the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a
regsitered trademark of Magnolia Plastics, Inc.
Contact Magnolia at sales@magnapoxy.com
Updated: September 26, 1996
