Magnolia Plastics Magnobond 6036

Plastics for the Space Age Since 1957


Magnobond 6036, Parts A & B

DESCRIPTION

Magnobond 6036 is a two part epoxy adhesive for road button and traffic delineators on both concrete and asphalt surfaces. This system has a low viscosity which makes it easy to handle through conventional dispensing equipment. Work life allows adequate time for placement of the markers and yet provides rapid traffic ready time.

SPECIAL FEATURES
PROPERTIES OF UNCURED MATERIAL 
     Color:                    A:  White
                               B:  Black
                             Mix:  Gray

     Shelf Life:               A:  6 months
                               B:  6 months

     Viscosity:                A:  1280 poise
                               B:   760 poise
                             Avg:  1020 poise
                           Ratio:  1.6

     SPI Classification:       A:  4
                               B:  4

     Flash Point:              > 200°F

     Specific Gravity:         A:  1.70
                               B:  1.82
                             Mix:  1.76
MIXING INSTRUCTIONS 
     Mix Ratio:              Parts by Weight, A:B   100:107
                             Parts by Volume, A:B     1:1

     Cure Schedule:          7 days at room temperature

     Pot Life @ 77°F:        9 minutes
PROPERTIES 
     Thixotropy:             > 80 Mils
     Adhesive Strength;        2,800 psi
     Impact Strength:          7.0 ft/lbs.
     Set Time:               < 40 minutes




            DANGER                            FIRST-AID
--------------------------------     -------------------------
May cause severe irritation.         Eyes - Immediately flush
Do not get in eyes, on skin          eyes with plenty of water
or clothing.                         for at least 15 minutes.
Do not inhale vapors.                Get medical attention.
Wear rubber gloves & aprons.         Skin - Wash immediately
Use with adequate ventilation.       with soap and water.
Wash thoroughly after handling.      Clothing - Remove clothing
For industrial use only.             and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 07/06/92

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996