Magnolia Plastics Adhesive Magnobond 6155

Plastics for the Space Age Since 1957


Magnobond 6155, Parts A & B

DESCRIPTION

Magnolia 6155, A & B is a two part epoxy system that has balanced high peel strength and good shear strength at room temperature and at 160°F.

PRODUCT SYNOPSIS 
 Specific Gravity:                       Cure Schedule:   7 days at R.T.    

 A: Compound             1.02
                                        
 B: Curing Agent         0.97

    Mix                  0.99            Shelf Life:  A:12 mos.    B:12 mos.

Viscosity @ 77°F:                        Properties Before Cured:

 A: Compound          190,000 cps        SPI Classification: A:  4    B:  4

 B: Curing Agent          800 cps        Flash Point: A: >200°F     B: >200°F

    Mix                42,000 cps        Flammable:         YES       YES
                                         Under 100°F:   A:   NO    B:  NO

Mix Ratio:                               Combustible:       YES       YES
100:35         Parts by Weight, A:B      100-200°F:     A:   NO    B:  NO

               Parts by Volume, A:B      Corrosive:         YES       YES
                                                       A:    NO    B:  NO

100 gram mass
Pot Life @ 77°F:   40 minutes        Freight Class:  A: 1   B:  2
OTHER PROPERTIES AND INFORMATION 
T Peel Strength, R.T. PLI             50
Lap Shear Strength, R.T. PSI        4,500
Lap Shear Strength, 160°F, PSI        800
Hardness, Shore D @ 77°F               72


      Test                            104-228              Requirement

Gel Time, minutes                       80                 50, minimum

Density, gram/cc                       0.48               0.5, maximum

Compressive Strength, KSI              3.0                2.0, minimum

Compressive Modules, KSI               302.0             60.0, minimum

Tensile Shear Strength, KSI            1.524            0.750, minimum

Fluid Immersion
     Weight Gain,%
     TT-S-735, Type III Test Fluid     -0.01              3.0, maximum
     MIL-H-5606 Hydraulic Fluid         1.46              4.2, maximum
     Monsanto Low Density Hydraulic
             Test Fluid                 2.40              8.0, maximum
     Distilled Water                    0.82              4.1, maximum

Flammability
     60 second vertical
     Extinguishing Time, seconds          0               5.0, maximum
     Burn Length, inches                 4.0              4.0, maximum
     Drip Extinguishing Time, seconds     0               3.0, maximum

Flammability Floor Panel
     60 second vertical
     Extinguishing Time, seconds         4.0             15.0, maximum
     Burn Length, inches                 3.9              4.0, maximum
     Drip Extinguishing Time, seconds     0               3.0, maximum

Handling                                passes
Spec Sheet Dated: 11/30/94

For more information, contact us at:

How To Order:

Doing Business with Magnolia Plastics



Return to Magnolia Plastics Home Page

Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a regsitered trademark of Magnolia Plastics, Inc.

Contact Magnolia at sales@magnapoxy.com
Web Page Construction and Maintenance By: IFDS Enterprises, Inc.
Updated: September 26, 1996