Magnolia Plastics Adhesive Magnobond 65
Plastics for the Space Age Since 1957
Magnobond 65, Parts A & B
(Formerly called 91-593, A/B)
DESCRIPTION
Magnobond 65, A & B is a fast curing two part epoxy adhesive system.
PRODUCT SYNOPSIS
Specific Gravity: Cure Schedule: 4-5 minutes - set
A: Compound 1.4 3-5 days - full cure
B: Curing Agent 1.4
Mix 1.4 Shelf Life: A: 6 mos. B: 6 mos.
Viscosity @ 77°F: Properties Before Cured:
A: Compound * 40,000 cps SPI Classification: A: 4 B: 4
B: Curing Agent * 56,000 cps Flash Point: A: >200°F B: >200°F
Mix Flammable: YES YES
* Brookfield at 50 RPM Under 100°F: A: NO B: NO
Mix Ratio: Combustible: YES YES
1:1 Parts by Weight, A:B 100-200°F: A: NO B: NO
1:1 Parts by Volume, A:B Corrosive: YES YES
A: NO B: NO
Pot Life @ 77°F: 1« - 2 minutes Freight Class: A: 1 B: 2
Static Mixer
OTHER PROPERTIES AND INFORMATION
Lap Shear Strength vs. Cure Time, ASTM D1002 using FPL etched aluminum
| Cure Time | Lap Shear Strength |
| 5 Minutes | 649 psi |
| 10 Minutes | 1527 psi |
| 20 Minutes | 1591 psi |
| 4 Days | 4300 psi |
Spec Sheet Dated: 02/03/93
For more information, contact us at:
Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296 USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email: sales@magnapoxy.com
How To Order:
Doing Business with Magnolia Plastics
Return to Magnolia Plastics Home Page
Copyright © 1996, Magnolia Plastics, Inc. All Rights Reserved, including
the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a
regsitered trademark of Magnolia Plastics, Inc.
Contact Magnolia at sales@magnapoxy.com
Updated: September 26, 1996