Magnolia Plastics Syntactic 97-1
Plastics for the Space Age Since 1957
High Strength Epoxy Potting System
Magnobond 97-1, Parts A & B
DESCRIPTION
Magnobond 97-1, A&B is a high strength epoxy potting system designed to meet the requirements of Canadair CMS 532-02, Revision B, Amendment 1, Type II.
SPECIAL FEATURE
Magnobond 97-1, A & B is designed to be a lower exotherming version of Magnolia 97, A & B.
MIX RATIO
Magnobond 97-1, Part A ··············· 100 parts by weight
Magnobond 97-1, Part B ··············· 14 parts by weight
CURE SCHEDULE
168 hours @ 77°F or 5 hours @ 77°F plus 1 hour @ 160°F
PROPERTIES
All data below were tested on specimens cured 7 days @ room temperature and tested per CMS 532-02, Revision B, Amendment 1, Type II.
| Test | CMS 532-02 Requirement | Test Results |
|---|
| Viscosity | 25,000 cps maximum | 21,000 cps |
| Pot Life | 20 minutes minimum | 65 minutes |
| Water Absorbtion | 1.25% maximum | 0.80% |
| Density/cc | 1.70 g/cc maximum | 1.52 |
| Hardness (Shore D) | 75 minimum | 85D |
| Compressive Strength @ 2% Deflection | | |
70 ± 5°F
| 7.51 ksi minimum
| 12.5 ksi
|
160 ± 5°F
| 2.0 ksi minimum
| 8.2 ksi
|
| Ultimate Compressive Strength @ 70 ± 5°F | 12 ksi minimum | 12.6 ksi |
| Flatwise Adhesive Tensile Strenght @ 160 ± 5°F | 1000 psi minimum | 1369 ksi |
Specification: Canadair CMS 532-02, Revision B, Amendment 1, Type II.
DANGER FIRST-AID
-------------------------------- -------------------------
May cause severe irritation. Eyes - Immediately flush
Do not get in eyes, on skin eyes with plenty of water
or clothing. for at least 15 minutes.
Do not inhale vapors. Get medical attention.
Wear rubber gloves & aprons. Skin - Wash immediately
Use with adequate ventilation. with soap and water.
Wash thoroughly after handling. Clothing - Remove clothing
For industrial use only. and wash before reuse.
Keep container closed.
Do not reuse this container.
Spec Sheet Dated: 11/10/94
For more information, contact us at:
Sales Division
Magnolia Plastics, Inc.
5547 Peachtree Industrial Boulevard
Chamblee, GA 30341-2296 USA
770-451-2777, Voice
770-451-5376, FAX
800-831-8031, Voice
Email: sales@magnapoxy.com
How To Order:
Doing Business with Magnolia Plastics
Return to Magnolia Plastics Home Page
Copyright © 1998, Magnolia Plastics, Inc. All Rights Reserved, including
the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a
regsitered trademark of Magnolia Plastics, Inc.
Contact Magnolia at sales@magnapoxy.com
Updated: September 11, 1998
